Product Information
Product code: GB-5ZA Category: Bead Seaters$389.00
The Automatic Bead Booster® features an Automatic Valve instead of the slower, more awkward manual release valve.
The Automatic Bead Booster® is completely portable and compact for use on any service truck. It also features a safety pop-off valve to prevent overfilling and a set of goggles and earplugs for protection.
All of Gaither’s Bead Booster® tanks are ASME, CE and CRN approved and certified.
HOW THE AUTOMATIC BEAD BOOSTER® GB-5ZA WORKS:
Gaither’s Automatic Bead Booster® is designed to assist in the inflation of tubeless tires at a high level of efficiency. Simply fill the Automatic Bead Booster® to the necessary pressure and attach an air line to the valve stem of the wheel. Then aim the barrel between the tire bead and wheel flange. Instead of using a manual release valve, press the trigger located on the tank handle to allow an instantaneous blast of air to set the bead. Because the automatic valve releases the air much faster, less air pressure is necessary and is therefore much more efficient than manual units.
Download product information.
Our offers
38L RAR Bead Booster®
The 38L RAR BEAD BOOSTER® is the most powerful bead seater in our arsenal. It comes equipped with the same Rapid Air Release valve as the famous BEAD BAZOOKA® giving it the ability to seat almost any tire.
It also utilizes our specially designed Jet-Assist Barrel that creates a dramatic Venturi Effect, drawing in extra air and forcing it into the tire cavity, providing even more Bead Seating power.
Intended for large agricultural and commercial tires, the 38L RAR BEAD BOOSTER® can handle anything you throw at it.
- The tank is CE/ASME certified
- Lightweight aluminum tank
- RAR valve with trigger release
- Internal proprietary coating protects against rust
Covered by one or more U.S. patents, including: Pat. 10,800,216 Pat. 10,800,215 Pat. 10,759,238 Pat. 10,266,019 Pat. 8,752,604 Pat. 9,033,306 Pat. 9,822,893 Pat. 9,649,897
Free Shipping
BEAD BAZOOKA® (Gen 2)
The next generation of BEAD BAZOOKA® is here!
Introducing the second generation BEAD BAZOOKA®, the most advanced bead seater ever made. It is capable of handling a huge range of tires, from motorcycles to light agricultural vehicles.
The new BEAD BAZOOKA® utilizes an upgraded version of the trigger-operated rapid air release (RAR) valve technology found in the original BEAD BAZOOKA® models. The extra power it delivers allows it to be smaller and lighter while still allowing the user to seat even the most stubborn tire beads. The new valve is also easily serviced or replaced so that you can expand its service life and maximize uptime.
- Half the size twice the power
- Serviceable/Replaceable 2’’ RAR valve
- Utilizes ultra-compact design
- Anti-corrosion interior tank coating
Each model is intended for different tire sizes.
- BB3L2 - for ATV, motorcycle, car, and light commercial vehicles
- BB6L2 - for motorcycle, car, light truck, and heavy commercial vehicles
- BB10L2 - for car, light truck, heavy commercial, and light agricultural vehicles
Download the user manual.
Covered by one or more U.S. patents, including: Pat. 10,800,216 Pat. 10,800,215 Pat. 10,759,238 Pat. 10,266,019 Pat. 8,752,604 Pat. 9,033,306 Pat. 9,822,893 Pat. 9,649,897
5G RAR Bead Booster®
The 5G RAR BEAD BOOSTER® is an extremely capable bead seater. It comes equipped with the same Rapid Air Release valve as the famous BEAD BAZOOKA® giving it the ability to seat stubborn tires with the push of a button.
Intended for use on a variety of tire sizes, including light commercial vehicles, trucks (wide base), and agricultural equipment.
Details:
- The tank is CE/ASME certified
- RAR valve with trigger release
- Internal proprietary coating protects against rust
- Up to 145 PSI
Specifications:
Weight: 32 lbs
Dimensions: 30 (l) x 18in (w) x 13in (h)
Covered by one or more U.S. patents, including: Pat. 10,800,216 Pat. 10,800,215 Pat. 10,759,238 Pat. 10,266,019 Pat. 8,752,604 Pat. 9,033,306 Pat. 9,822,893 Pat. 9,649,897
Additional information
Weight | 31 lbs |
---|---|
Dimensions | 18 × 13 × 18 in |
Related Products
Manual Bead Booster®
A simple and reliable bead seater designed to be used on a wide variety of vehicles, including commercial trucks.
The Bead Booster® features a safety pop-off valve to prevent overfilling and a set of goggles and earplugs for protection.
All of Gaither’s Bead Booster® tanks are ASME, CE and CRN approved and certified.
Bead Booster® GB-5Z is available for private label programs.
HOW THE Bead Booster® GB-5Z WORKS:
Bead Booster® is designed to assist in the inflation of tubeless tires by setting the bead with a quick release of air pressure. To use the Bead Booster® efficiently, simply fill the tank to the necessary pressure and attach an air line to the valve stem of the wheel. Then aim the barrel between the tire bead and wheel flange, and release the manual valve in order to allow a blast of air to set the bead.
Download the user manual.
Inflation Tool Accessories
This kit includes accessories to make bead seating difficult tires as easy as possible.
- KD stand (GB-51) sets bottom bead on difficult tires
- Air Whip Hose (GB-52) enables a continuous flow of air to the tire
- Tire Wedge (GB-53) props tire near the valve stem.
The Inflation Tool Accessories work with the Bead Booster® and Bead Bazooka® products.
38L RAR Bead Booster®
The 38L RAR BEAD BOOSTER® is the most powerful bead seater in our arsenal. It comes equipped with the same Rapid Air Release valve as the famous BEAD BAZOOKA® giving it the ability to seat almost any tire.
It also utilizes our specially designed Jet-Assist Barrel that creates a dramatic Venturi Effect, drawing in extra air and forcing it into the tire cavity, providing even more Bead Seating power.
Intended for large agricultural and commercial tires, the 38L RAR BEAD BOOSTER® can handle anything you throw at it.
- The tank is CE/ASME certified
- Lightweight aluminum tank
- RAR valve with trigger release
- Internal proprietary coating protects against rust
Covered by one or more U.S. patents, including: Pat. 10,800,216 Pat. 10,800,215 Pat. 10,759,238 Pat. 10,266,019 Pat. 8,752,604 Pat. 9,033,306 Pat. 9,822,893 Pat. 9,649,897
Free Shipping
BEAD BAZOOKA® Charging Station
Floor space can be one of the most valuable assets in the workshop. Make sure yours is as clean and tidy as possible with the Bead Bazooka® Changing Station. This stand gives you the perfect place to keep your Bead Bazooka® safe and out of the way until it is needed.
- Allows technicians to store the BEAD BAZOOKA® near the working area without leaving it on the floor.
- Protects the tool from dropping, being kicked, broken components, etc.
- Allows technicians to fill the tank while in the holster and offers a direct view of the pressure gauge.
- Helps keep the shop clean and safer.
- Accessory hooks are convenient storage for airlines, tire wedges, eye protection, etc.
- Works with all BEAD BAZOOKA® models.
BEAD BAZOOKA® (Gen 2)
The next generation of BEAD BAZOOKA® is here!
Introducing the second generation BEAD BAZOOKA®, the most advanced bead seater ever made. It is capable of handling a huge range of tires, from motorcycles to light agricultural vehicles.
The new BEAD BAZOOKA® utilizes an upgraded version of the trigger-operated rapid air release (RAR) valve technology found in the original BEAD BAZOOKA® models. The extra power it delivers allows it to be smaller and lighter while still allowing the user to seat even the most stubborn tire beads. The new valve is also easily serviced or replaced so that you can expand its service life and maximize uptime.
- Half the size twice the power
- Serviceable/Replaceable 2’’ RAR valve
- Utilizes ultra-compact design
- Anti-corrosion interior tank coating
Each model is intended for different tire sizes.
- BB3L2 - for ATV, motorcycle, car, and light commercial vehicles
- BB6L2 - for motorcycle, car, light truck, and heavy commercial vehicles
- BB10L2 - for car, light truck, heavy commercial, and light agricultural vehicles
Download the user manual.
Covered by one or more U.S. patents, including: Pat. 10,800,216 Pat. 10,800,215 Pat. 10,759,238 Pat. 10,266,019 Pat. 8,752,604 Pat. 9,033,306 Pat. 9,822,893 Pat. 9,649,897
BEAD BAZOOKA® Valve Repair Kit (Gen 2)
The Bead Bazooka® Valve Repair Kit, or BBVRK, is a new tool that lets the user repair/replace the piston/valve of the Bead Bazooka®. The BBVRK is intended to extend the lifespan of the Bead Bazooka® by making the Bead Bazooka® fully serviceable. This kit saves the user precious time because the repairs can be done quickly and effectively in-house.
Compatible with:
Second generation Bead Bazooka® models BB3L2, BB6L2, BB10L2
First generation Bead Bazooka® model BB12L
38 Liter Bead Booster® GB-38L
*includes Spring (Part# 12955)
Bead Seater Upgrade Kit
The Gaither Bead Seater Upgrade Kit is the easiest and fastest way to maximize the power from your current bead seater tank. Each kit comes with a specially designed barrel to optimize airflow, and a push-button-operated RAR valve, using the same technology as our famous Bead Bazookas®.
- Increases inflation power of existing bead seater by optimizing airflow
- Upgrades your old manual bead seater into a push-button-operated automatic
- Fits most bead seater models with standard 1.5'' or 2'' openings.
- Reversible handle allows for both right-hand and left-hand users based on preference.
- Each kit includes a specially designed barrel for immediate use after installation.
Covered by one or more U.S. patents, including: Pat. 10,800,216 Pat. 10,800,215 Pat. 10,759,238 Pat. 10,266,019 Pat. 8,752,604 Pat. 9,033,306 Pat. 9,822,893 Pat. 9,649,897
5G RAR Bead Booster®
The 5G RAR BEAD BOOSTER® is an extremely capable bead seater. It comes equipped with the same Rapid Air Release valve as the famous BEAD BAZOOKA® giving it the ability to seat stubborn tires with the push of a button.
Intended for use on a variety of tire sizes, including light commercial vehicles, trucks (wide base), and agricultural equipment.
Details:
- The tank is CE/ASME certified
- RAR valve with trigger release
- Internal proprietary coating protects against rust
- Up to 145 PSI
Specifications:
Weight: 32 lbs
Dimensions: 30 (l) x 18in (w) x 13in (h)
Covered by one or more U.S. patents, including: Pat. 10,800,216 Pat. 10,800,215 Pat. 10,759,238 Pat. 10,266,019 Pat. 8,752,604 Pat. 9,033,306 Pat. 9,822,893 Pat. 9,649,897
Cluster
Cluster of replacement parts for your BEAD BAZOOKA® or BEAD BOOSTER®. Includes 1 of each of the following (assembly required):
- 12914B - Pressure Gauge
- 12916B - Intake Valve
- 12917B - Safety Valve
- 12930M - G Connector
Compatible with BEAD BAZOOKA® models BB3LM, BB6LM, BB9LM, BB12LM, BB3L2, BB6L2, and BB10L2.
Compatible with BEAD BOOSTER® models GB-5M and GB-5MA.
Our highly qualified team of experts is here to help you. Contact us today.
800-452-5010
Contact Us