BEAD BAZOOKA® Charging Station
Product Information
Categories: Bead Seaters, Specialty Products$117.00
Floor space can be one of the most valuable assets in the workshop. Make sure yours is as clean and tidy as possible with the Bead Bazooka® Changing Station. This stand gives you the perfect place to keep your Bead Bazooka® safe and out of the way until it is needed.
- Allows technicians to store the BEAD BAZOOKA® near the working area without leaving it on the floor.
- Protects the tool from dropping, being kicked, broken components, etc.
- Allows technicians to fill the tank while in the holster and offers a direct view of the pressure gauge.
- Helps keep the shop clean and safer.
- Accessory hooks are convenient storage for airlines, tire wedges, eye protection, etc.
- Works with all BEAD BAZOOKA® models.
More Info
Additional information
Weight | 13 lbs |
---|---|
Dimensions | 36 × 7 × 7 in |
Related Products
Gaither’s O’liner®
Gaither's O-Line-er® tool is designed to make it easy to line up wheel studs with holes in the rim for easy installation, resulting in decreased installation time, which can increase worker productivity and reduce the risk of injury from struggling with heavy tires and rims.
*Fits 22mm stud
Click here to see the video.
$28.00
Add to cart
8 Gallon Auto Bead Booster®
Gaither’s GB-8A Bead Booster® carries an 8 gallon (32 Liter) tank which allows for use on a greater range of tire sizes. It also has two unique features: an Automatic Valve with a one-touch foot pedal release mechanism, and a built-in tire stand that automatically sets the bottom bead allowing for use of lower air pressures.
Simply fill the Bead Booster® to the necessary pressure, rest the tire/wheel against the stand, aim the barrel between the tire bead and wheel flange, and press the foot pedal! This instantaneous blast of air sets the bead of the tire using less pressure than a manual unit, therefore making it the safest unit available.
The Bead Booster® is still completely portable for use on any service truck. The GB-8A also features a safety pop-off valve to prevent overfilling, an Air Whip Hose, and a set of goggles and earplugs for protection.
All of Gaither’s Bead Booster® tanks are ASME and fully CE approved and certified. The tanks are also coated inside and outside to guarantee maximum lifespan.
HOW IT WORKS MOUNTING:
Gaither’s Automatic 8 Gallon Bead Booster® is designed to assist in the inflation of tubeless tires. Fill the tank to the desired pressure, and then lean the tire/wheel assembly against the built-in stand of the unit. This automatically sets the back bead of the tire.
Attach an air line to the valve stem of the wheel and aim the barrel between the tire bead and wheel flange while holding the barrel with both hands. Instead of using a manual release valve, press the foot pedal release mechanism located on the lower part of the cage to allow an instantaneous blast of air to set the bead. Because the automatic valve releases the air much faster, less air pressure is necessary for the tank and is, therefore, more efficient than manual units.
Specs: 30 kg
Download product information.
Wheel Breaker Set
This Wheel Breaker Kit eliminates one of the most dangerous jobs within the tire service industry. The manual hydraulic pump allows the technician to free/loosen frozen or oxidized wheels from each other or from the vehicle.
- Hydraulic Stroke: 1.0”/25.4 mm
- Cylinder: 3.5”/9 cm
- 4 adaptors included: .39”/1 cm, .98”/2.5 cm, 1.9”/5 cm, adjustable 3.4”/8.7 cm, – 4.9”/12.5 cm
- Adapters included for various travel distances/wheel configurations
- Manual hydraulic foot pump included
- Case included
- Weight: 40.7 lbs/18.5 kg
- This wheel breaker kit eliminates one of the most dangerous jobs within the tire service industry
- Wheel removal + (Alloy and light steel wheels are often literally frozen (glued) to the vehicle)
$905.00
Add to cart
Wheel Dolly
The Winntec Truck Wheel Dolly is the easiest and safest way to install and uninstall wheels from commercial vehicles.
It uses simple principles of leverage to ensure the user experiences the least amount of physical strain possible. The Winntec Wheel Dolly is unique because it allows the user to use their body weight to push the handle down to lift the wheel assembly.
- Easy installation and removal of truck tire/wheel assemblies
- Heavy-duty industrial bearings
- 3 positions for rollers depending on tire size
- Great tool for every service truck
- Avoid Damage to wheel bolts and expensive modern wheels
- For all wheels from 6.5” - 24.5”, including super singles
- New longer rollers make it even easier to handle super single tires
$276.00
Add to cart
Bead Pressing Tool
This tool was specifically designed for the mounting and demounting of all types of Run Flat, Low Profile, and SSR Tires.
It makes it much easier for one person to change even the most difficult tires with any tire changer.
$292.00
Add to cart
SAFERGO
The Winntec SAFERGO truck tire dolly is the easiest way to install and remove truck wheels.
This convenient dolly makes manually lifting wheelsets completely unnecessary. Simply slide the rollers underneath the tire and use the jack handle to raise it to the desired height. You can then use the included Gaither O-LINE-ER® to perfectly position the wheel for easy installation. The SAFERGO also comes equipped with a collapsible handle frame making it easy to store and ideal for mobile service.
- Lifting Capacity 350 lbs
- Reduces back strain
- Includes Gaither O-LINE-ER®
- Collapsible handle frame
$570.00
Add to cart
38L RAR Bead Booster®
The 38L RAR BEAD BOOSTER® is the most powerful bead seater in our arsenal. It comes equipped with the same Rapid Air Release valve as the famous BEAD BAZOOKA® giving it the ability to seat almost any tire.
It also utilizes our specially designed Jet-Assist Barrel that creates a dramatic Venturi Effect, drawing in extra air and forcing it into the tire cavity, providing even more Bead Seating power.
Intended for large agricultural and commercial tires, the 38L RAR BEAD BOOSTER® can handle anything you throw at it.
- The tank is CE/ASME certified
- Lightweight aluminum tank
- RAR valve with trigger release
- Internal proprietary coating protects against rust
Covered by one or more U.S. patents, including: Pat. 10,800,216 Pat. 10,800,215 Pat. 10,759,238 Pat. 10,266,019 Pat. 8,752,604 Pat. 9,033,306 Pat. 9,822,893 Pat. 9,649,897
Free Shipping
$813.00
Add to cart
U.W.T. Wheel Weight Pliers & Hammer
Heavy-duty wheel weight pliers and hammer, the only tool on the market which will remove all wheel weights Fast & Easy without pinching fingers or scratching wheels.
- Heavy-duty design
- No pinching fingers or scratching wheels
- FAST & EASY
- Made in the USA
$92.00
Add to cart
5G RAR Bead Booster®
The 5G RAR BEAD BOOSTER® is an extremely capable bead seater. It comes equipped with the same Rapid Air Release valve as the famous BEAD BAZOOKA® giving it the ability to seat stubborn tires with the push of a button.
Intended for use on a variety of tire sizes, including light commercial vehicles, trucks (wide base), and agricultural equipment.
Details:
- The tank is CE/ASME certified
- RAR valve with trigger release
- Internal proprietary coating protects against rust
- Up to 145 PSI
Covered by one or more U.S. patents, including: Pat. 10,800,216 Pat. 10,800,215 Pat. 10,759,238 Pat. 10,266,019 Pat. 8,752,604 Pat. 9,033,306 Pat. 9,822,893 Pat. 9,649,897
$389.00
Add to cart
Cluster
Cluster of replacement parts for your BEAD BAZOOKA® or BEAD BOOSTER®. Includes 1 of each of the following (assembly required):
- 12914B - Pressure Gauge
- 12916B - Intake Valve
- 12917B - Safety Valve
- 12930M - G Connector
$80.40
Add to cart
NEED HELP CHOOSING THE RIGHT EQUIPMENT?
Our highly qualified team of experts is here to help you. Contact us today.
800-452-5010
Contact Us