|Model||Cap U.S./Met.||Min h. in/mm||Max h. in/mm||Length in/mm||Width in/mm||G.W. lbs/kg||N.W. lbs/kg|
Y420300, Y420303, Y422500, Y420302, Y420225, Y420250, Y420251, Y420330, Y420331
The GB-8A is the largest Bead Booster® in Gaither’s booster line. It carries an 8 gallon (32 Liter) tank which allows for use on a greater range of tire sizes. It also has two unique features: an Automatic Valve with a one-touch foot pedal release mechanism, and a built-in tire stand that automatically sets the bottom bead allowing for use of lower air pressures. Simply fill the Bead Booster® to the necessary pressure, rest the tire/wheel against the stand, aim the barrel between the tire bead and wheel flange, and press the foot pedal! This instantaneous blast of air sets the bead of the tire using less pressure than a manual unit, therefore making it the safest unit available. The Bead Booster® is still completely portable for use on any service truck. The GB-8A also features a safety pop-off valve to prevent overfilling, an Air Whip Hose, and a set of goggles and earplugs for protection. All of Gaither’s Bead Booster® tanks are ASME and fully CE approved and certified. The tanks are also coated inside and outside to guarantee maximum lifespan. HOW IT WORKS MOUNTING: Gaither’s Automatic 8 Gallon Bead Booster® is designed to assist in the inflation of tubeless tires. This is the largest tank capacity of Gaither’s bead-seating product range. Fill the tank to the desired pressure, and then lean the tire/wheel assembly against the built-in stand of the unit. This automatically sets the back bead of the tire. Attach an air line to the valve stem of the wheel and aim the barrel between the tire bead and wheel flange while holding the barrel with both hands. Instead of using a manual release valve, press the foot pedal release mechanism located on the lower part of the cage to allow an instantaneous blast of air to set the bead. Because the automatic valve releases the air much faster, less air pressure is necessary for the tank and is, therefore, more efficient than manual units. Specs: 30 kg Download product information.
All GT models are rigorously tested and constructed to withstand heavy daily use by the world’s most demanding technicians in their commercial environments. When you purchase a genuine GT product through our authorized network of dealers around the world, you can be assured that you’re getting the real thing. You can take comfort in the meticulous approach Gaither takes to quality control and safety. In fact, we offer a unique 3-year warranty guaranteeing, that for this period, our products won’t show any hydraulic or pneumatic malfunctioning.
- Designed for 30,000 minimum lift cycles
- Built-in water separator
- Long, one-piece handle for durability, safety, and easy maneuvering
$2,043.00 – $3,017.00 Select options
Off-the-road bead breaker tool used on 25” to 51” 5-piece rims with pry bar pockets. It is designed to break earthmover tire beads on rusted rims. The bead breaker can be operated with a manual or air hydraulic foot pump. To be used on 5 piece rims 25”-51”. With pry bar/bead loosening pockets. Gross weight = 14 lbs/6.4 kg FREE SHIPPING
$974.00 Add to cart
This 12 Ton capacity jack stand has a welded steel construction for superior safety and strength. Nylon wheels and a removable handle ensure quick and safe positioning under most vehicles. It also comes equipped with a handle holder for vertical storage while not in use. This unique jack stand comes as a complete set of two stands.
$308.00 Add to cart
The Winntec Smart Cart is the best way to transport heavy tires and wheels around the shop. With its spring-loaded arms and no foot pedals, grabbing and releasing tire stacks couldn’t be easier. HOW THE SMART CART Y471147HD WORKS:
- Simply push the Smart Cart toward the stack of tires and watch as the spring-action arms grasp the tires without the need for cumbersome pedals, levers, or gas springs.
- Tip the Smart Cart toward you – note the tilting-action. This allows for less stress on the technician.
- Use the Push / Pull Handle to remove the cart from the tire stack.
$850.00 Add to cart
As a dual-stage air service jack, the Y432032 has an exceptional entrance height for the lifting power that it provides. That, combined with its compact dimensions, makes it ideal for both workshop and roadside service. In addition, the Y432032 is equipped with an air controlled descent to ensure maximum safety while dealing with heavy loads, and extensions for added height.
- Dual-stage 32/16T Jack
- Low minimum height
- Air Controlled
$1,746.00 Add to cart
Keep your shop and your hands clean with S_Wipes, Winntec’s premium hand wipes. Each box contains 336 deep cleaning wipes, tough enough for any shop. Grease, dirt, and grime, no matter what you through at it, the S_Wipe can handle it.
- Powerful cleaning
- Great for hands and surfaces
- 336 wipes per box
$47.00 Add to cart
The Bright Premium Harrier wheel balancer is a top-quality machine that makes the tedious job of balancing fast and easy. It comes packed with features that help to increase productivity and accuracy. • Easy to assemble • Foot operated brake • LED light bar • Centering components manufactured by Haweka • Multiple pre-programmed settings for most passenger wheels FREE SHIPPING
The Winntec Wheel Assist allows a technician to remove and replace heavy tire/wheel assemblies from and onto a vehicle without physical strain. Move tires from vehicle to changer to balancer and back without any lifting! This ergonomically correct product maintains safety in any tire shop and reduces expensive worker injury claims by handling all passenger sizes, including run-flats, with ease. The Wheel Assist travels from floor to post-lift height and is free of hydraulics, pneumatics, and electric components, making it virtually maintenance-free.
- Easily lift heavy tire/wheel assemblies
- Reduces physical strain
- Ergonomically Correct
$1,165.00 Add to cart
Jacks have long been a source of workplace accidents and injuries. The threat of damage and bodily harm from falling multi-ton vehicles is all too real, as any experienced tech knows. To combat this common problem, we have developed a jack that is far more stable and reliable than the competition. The Moore-Safe Jack is designed to securely cradle vehicle components, dramatically reducing the chance of slippage due to misplacement or a shifting load. The Moore-Safe's patented design features two interchangeable mounting heads. A "Y" Head for round and square surfaces as well as a "Round" Head that can cradle u-bolts and provide a wide footprint for flat surfaces. Both were engineered to maintain the center of gravity even in the event of a shifting load, guaranteeing maximum safety even in the least ideal circumstances.
- Comes with 2 interchangeable adaptor heads
- Maintains the center of gravity while lifting
- Dramatically reduces the chance of vehicle drops
- Makes jack positioning easy
- 20 Ton Lifting Capacity