Quick View
Jack Stands
All of our standard jack stands have a heavy-duty robot welded frame and a multi-position ductile ratchet bar. The quick adjustment mechanism allows the user to securely lock the stand into the right location. These models also Include counter-weighted pawls for safe securing.
Each model is sold as a set of two stands
Quick View
Jack The Mech
Big things come in small packages! Winntec's Jack the Mech is a jump starter, air compressor, power bank, and LED light all rolled into one portable unit. This is a must have for any driver; from your average commuter to the adventurous road warrior!
Jack the Mech features:
- Jump Starter
- Air Compressor
- LED Light
- Power Bank
- Digital Screen
- 24-Month Standby Charge
- Over-Current Protection
- Short-Circuit Protection
- Voltage Detection on Screen
- Over-Heat Protection
- Over-Time Protection
- Built-in Reverse Protection
Quick View
Left Hold Arm for Pneumatic Bead Breaker
Left Hold Arm for Pneumatic Bead Breaker (GTABB-01)
Quick View
Low Profile Air Bottle Jack
Low Profile Jack with a 20 Ton capacity. This unit includes a welded base to prolong service. It comes equipped with a chrome main ram and aluminum air motor to guarantee optimum lifetime. Air filter and air regulator connected to a hose included.
- Low Profile
- 20 Ton capacity
- Chrome main ram
- Includes air filter and air regulator
Download product information.
Quick View
Manual Bead Booster®
A simple and reliable bead seater designed to be used on a wide variety of vehicles, including commercial trucks.
The Bead Booster® features a safety pop-off valve to prevent overfilling and a set of goggles and earplugs for protection.
All of Gaither’s Bead Booster® tanks are ASME, CE and CRN approved and certified.
Bead Booster® GB-5Z is available for private label programs.
HOW THE Bead Booster® GB-5Z WORKS:
Bead Booster® is designed to assist in the inflation of tubeless tires by setting the bead with a quick release of air pressure. To use the Bead Booster® efficiently, simply fill the tank to the necessary pressure and attach an air line to the valve stem of the wheel. Then aim the barrel between the tire bead and wheel flange, and release the manual valve in order to allow a blast of air to set the bead.
Download the user manual.
Quick View
Mini Bolt
New design 17,5'' might come with a smaller stud hole. If so Gaither has a mini bolt available for the Bead Vice.
Specs: 0,5kg
Quick View
Mini Kit
The mini kit is a condensed economic version of the original Bead Saver System. The 12880M is a 3-piece system that mounts and dismounts all standard 19.5”, 22.5” and 24.5” tubeless tires, including those mounted on aluminum wheels. This mini kit comes with a newly designed clevis that works extremely well on wide base low profile tires.
HOW IT WORKS DISMOUNTING:
The first Bead is dismounted with the clevis & spoon end. The second Bead is dismounted with the beavertail end.
HOW IT WORKS MOUNTING:
The first bead can be mounted with the spoon end. The second Bead is mounted with the spoon end and Beadkeeper®.
Specs: 9kg
Download product information.
Not Available In The United States
Quick View
Moore-Safe Jack
Jacks have long been a source of workplace accidents and injuries. The threat of damage and bodily harm from falling multi-ton vehicles is all too real, as any experienced tech knows.
To combat this common problem, we have developed a jack that is far more stable and reliable than the competition. The Moore-Safe Jack is designed to securely cradle vehicle components, dramatically reducing the chance of slippage due to misplacement or a shifting load.
The Moore-Safe's patented design features two interchangeable mounting heads. A "Y" Head for round and square surfaces as well as a "Round" Head that can cradle u-bolts and provide a wide footprint for flat surfaces. Both were engineered to maintain the center of gravity even in the event of a shifting load, guaranteeing maximum safety even in the least ideal circumstances.
- Comes with 2 interchangeable adaptor heads
- Maintains the center of gravity while lifting
- Dramatically reduces the chance of vehicle drops
- Makes jack positioning easy
- 20 Ton Lifting Capacity
(Included in box: Moore-Safe Jack, Y Head, Round Head, Head Holder)
Download product information
Quick View
Moore-Safe Low-Profile Bottle Jack
Jacks have long been a source of workplace accidents and injuries. The threat of damage and bodily harm from falling multi-ton vehicles is all too real, as any experienced tech knows.
To combat this common problem, we have developed a jack that is far more stable and reliable than the competition. The Moore-Safe Jack is designed to securely cradle vehicle components, dramatically reducing the chance of slippage due to misplacement or a shifting load. This revolutionary jack is now available in a smaller version to tackle any job.
The Moore-Safe's patented design features two interchangeable mounting heads. A "Y" Head for round and square surfaces as well as a "Round" Head that can cradle u-bolts and provide a wide footprint for flat surfaces. Both were engineered to maintain the center of gravity even in the event of a shifting load, guaranteeing maximum safety even in the least ideal circumstances.
- Comes with 2 interchangeable adaptor heads
- Maintains the center of gravity while lifting
- Dramatically reduces the chance of vehicle drops
- Makes jack positioning easy
- 20 Ton Lifting Capacity
(Included in box: Moore-Safe Jack, Y Head, Round Head, Head Holder)
Download product information
Quick View
OTR Bead Breaker
Off-the-road bead breaker tool used on 25” to 51” 5-piece rims with pry bar pockets. It is designed to break earthmover tire beads on rusted rims. The bead breaker can be operated with a manual or air hydraulic foot pump.
To be used on 5 piece rims 25”-51”. With pry bar/bead loosening pockets.
Gross weight = 14 lbs/6.4 kg
FREE SHIPPING
Quick View
Platinum Demount Tool
Gaither’s Platinum Demounting Tool offers a popular design and proven functionality for any tire shop. The Demounting Tool is a one-piece tool that dismounts all standard 22.5” and 24.5” tubeless tires without having to lift the tire/wheel assembly.
HOW GAITHER'S PLATINUM DEMOUNTING TOOL 12100 WORKS:
- The first bead is dismounted by inserting the rollers and pulling the bar over.
- Take the bar back over to its original position so the rollers fall below the second bead.
- Pull the bar over again to fully dismount the second bead.
Click here to see the video.
Quick View
Platinum Mount Tool
Gaither’s 12200 Mount Bar, made to work with the 12100 demount bar makes mounting the tire faster, and easier.
HOW THE MOUNT TOOL 12200 WORKS:
1. The first bead is mounted using the end of the Mount Bar.
2. The second bead is mounted using the end of the Mount Bar and two Beadkeepers® (sold separately)
Gaither's Bead Keepers on a Rope (12894-P) eliminates the need for standing on the tire during the mounting process. Bead Keepers act as your feet and allow you to stand on the ground firmly without any threats of falling off the tire.
Quick View
Pneumatic Bead Breaker
GTABB-01 Gaither’s Pneumatic Bead Breaker with is designed to be used on agricultural, ATV, small OTR and most truck tires. The tool includes a blow case for storage and requires a minimum of 85 psi / 6 bar.
- Recommended for Agricultural, small OTR, and most truck tires
- Extremely Fast – saves time over conventional hydraulic bead breakers
- Lighter weight than conventional bead breakers – only 17 lbs.
- Includes blow case for storage
- Requires a minimum of 85psi
HOW THE PNEUMATIC BEAD BREAKER GTABB-01 WORKS:
- Connect airline to Pneumatic Bead Breaker.
- Adjust the collar to the desired width based on wheel thickness.
- Wedge the foot of the Bead Breaker between the tire bead and wheel flange.
- Make sure the direction switch is in the proper position and squeeze the trigger.
- Reverse the direction switch and squeeze the trigger to release from the wheel.
Click here to see the video.
FREE SHIPPING
Quick View
Power Unit Assembly for Winntec Garage Jacks
Power Unit Assembly for Winntec Garage Jacks.
Quick View
Red Rubber Wrapped Iron Wheel w/Bushings
Red Rubber Wrapped Iron Wheel w/Bushings for Wheely Dolly (G471105HD).
*Includes one wheel and two bushings as shown.
Quick View
Renegade™ by Bubba Rope®
FEAR NO MUD!
Ideal for Jeeps
Breaking Strength: 19,000 lbs.
3/4" x 20' — Meet the new generation of Power Stretch™ recovery rope in a compact size. With 100% more stretching ability and more pulling power than a flat web strap, Renegade is the perfect tool for safely snatching Jeeps and light trucks from mud, sand or snow. We even made it Military Camo green to match the military specs that this rope was derived from. Mesh duffel bag and camo Velcro wrap included.
Length is determined with rope under load.
Bubba Rope® is the original tougher, safer, kinetic energy off-road recovery rope, developed through our military contracts for pulling vehicles out of mud, sand or snow. It is the only snatch rope for the 4x4 market with a heavy vinyl polymer coating and Gator-ize® eyes.
- 100% double-braided nylon rope Gator-ize® Vinyl Polymer coating
- The only rope that uses exact US Military specs for splicing and coatings
- Water, UV and abrasive resistant
- Highest breaking strengths available, certified at our factory
- Each Bubba Rope® recovery rope includes a FREE mesh carrying case
A kinetic energy off-road recovery rope (KERR), Bubba Rope® provides superior performance, strength and durability that goes way beyond typical recovery ropes, snatch straps and chains. It stretches and actively uses its own kinetic energy to help get your stuck vehicle moving.
Quick View
Right Hold Arm for Pneumatic Bead Breaker
Right Hold Arm for Pneumatic Bead Breaker (GTABB-01)
Quick View
S_Wipes
Keep your shop and your hands clean with S_Wipes, Winntec’s premium hand wipes. Each box contains 336 deep cleaning wipes, tough enough for any shop. Grease, dirt, and grime, no matter what you through at it, the S_Wipe can handle it.
- Powerful cleaning
- Moisturizing
- Great for hands and surfaces
- Water-saving
- 336 wipes per box
Quick View
Saddle for Winntec Garage Jacks
Saddle for Winntec Garage Jacks
*Compatible with models G420303, G420302, & G420225.
Quick View
Saddle Pad for Winntec Garage Jacks
Saddle Pad for Winntec Garage Jacks
*Compatible with models G420303, G420302, G420300, & G420225.
Quick View
SAFERGO
The Winntec SAFERGO truck tire dolly is the easiest way to install and remove truck wheels.
This convenient dolly makes manually lifting wheelsets completely unnecessary. Simply slide the rollers underneath the tire and use the jack handle to raise it to the desired height. You can then use the included Gaither O-LINE-ER® to perfectly position the wheel for easy installation. The SAFERGO also comes equipped with a collapsible handle frame making it easy to store and ideal for mobile service.
- Lifting Capacity 350 lbs
- Reduces back strain
- Includes Gaither O-LINE-ER®
- Collapsible handle frame
Download product information 471106
Quick View
Screw for Pneumatic Bead Breaker
Screw for Pneumatic Bead Breaker (GTABB-01)
*Main Bolt Item 8 (TF-404039) on schematic.
Quick View
Slick’em
Gaither’s Slick’em tire lubricant is excellent for mounting/demounting applications. Slick’em lubricates the entire wheel allowing for a better fit between the tire and the wheel. This product does not contain silicone or petroleum solvents, which prevents damage and premature aging of tires.
Excellent Lubrication. Superior “Tack” and Bead Sealing qualities. Reduces tire/rim slippage. Concentrated; water soluble, can be diluted. Near neutral PH factor. Contains Rust Inhibitors. Non-Toxic, Environmentally Friendly. Fully certified.
Specs: 9.15 kg = 20 lbs
HOW SLICK’EM 12954 WORKS:
2 gallons of concentrated product inside of a 5 gallon mixing pail. Simply fill with water, stir and create five gallons.
Quick View
Slide Hammer
Protect your expensive wheels from swinging hammers by breaking the bead loose with Gaither’s Slide Hammer. Use only on wheels without a hump.
HOW THE SLIDE HAMMER 12026B WORKS:
- Place the wedge of the Slide Hammer on the bead area of the tire near the flange of the wheel.
- Draw up the “slide” of the Slide Hammer and slam it down in order to break tire bead loose from wheel flange. It may be necessary to repeat this process in multiple positions around the tire/wheel assembly.
Quick View
Super Slick’em®
Gaither’s Super Slick’em® should be applied to all tires before being mounted or before deflation if being dismounted. Super Slick’em® is a special non-water based lubricant that penetrates and aids in breaking the tire bead from the wheel by eating away rust and grease. Because it does not contain water, Super Slick’em® will not freeze or cause rust to form.
Super Slick’em® 12904 is available in 1 Gallon or 4-1 Gallon (3.8 liter) Containers. Each purchase includes a free 1 Quart Applicator Bottle.
Quick View
Switch Valve
The Switch Valve is for Gaither RAR Bead Seaters. If your Switch Valve isn't functioning properly, then a replacement may be just what you need to get your BEAD BAZOOKA® or BEAD BOOSTER® seating beads again!
Compatible with BB6L, BB9L, BB12L, BB3L2, BB6L2, BB10L2, GB-5MA, 12941R, and 12942R.
Not compatible with BB3LM, BB6LM, BB9LM, GB12LM, GB-8A, GB-5Z, GB-5ZA, and GB-38L.
Quick View
The Beads
Balancing large wheelsets on machines can be a time-consuming process. Gaither’s BEADS offers another balancing option for those looking to increase the efficiency of their service. All you need to do is match the tire dimensions with the correct application bag size by using THE BEADS application chart or our mobile phone app, available on the Apple App Store and Google Play Store. Once you have selected the correct bag size all that is left to do is throw the inner bag inside the tire cavity and mount the tire as you would normally, then use the included valve core to inflate.
DOWNLOAD application chart.
• TPMS safe
• Each bag comes with valve core and cap
• Works with Gaither’s free THE BEADS app
Order now and get a free Application Poster! Only available while supplies last.
Quick View
Tire Paste
Gaither’s Universal Mounting Paste is ideal for mounting all tubeless tires including passenger, light truck, truck, motorcycle, agricultural, OTR, and ATV tires. Wide pail fits all Hunter machines (GP-100), standard pail also available (GP-200).
Universal Mounting Paste available in the low-profile pail configuration as 1 single pail or case of 4 pails:
- Low profile (#GP-100) is 10” x 5” (diameter x height)
- Standard (#GP-200) is 9" x 7" (diameter x height)
Not Available In Europe
Quick View
Tire Spreader
Gaither’s Tire Spreader is a simple tool designed to spread tire beads quickly to make tire repairs easier than ever!
HOW THE TIRE SPREADER GTS-01 WORKS
- Be sure Tire Spreader fingers are in closed position.
- Place Tire Spreader fingers between tire beads.
- Use ½” impact gun with 1-1/4” (32mm) socket to open the Tire Spreader fingers.
- Continue to spread tire beads until there is sufficient air space to repair the tire.
- Remove Tire Spreader once the repair is complete.
This tool is ideal for mobile service!
Click here to view video
Quick View
TRAC Roller Plate
The TRAC Roller Plate Accessory for the TRAC Tire Jack allows for an easier alignment of the holes of the wheel to the studs of the hub. Use the TRAC, not your back!
Details:
• Heavy-duty welded steel construction offers extreme durability
• Steel base roller offers tire support and rolling convenience
Specifications:
Weight: 2 lbs
Dimensions: 8in (l) x 5in (w) x 1.25in (h)
Quick View
TRAC Tire Jack
Gaither's newest tool is simple in design and drastically helps technicians when mounting and demounting heavy wheel assemblies to and from a vehicle's hub. The TRAC Tire Jack simply slides under the tire and wheel and allows the technician to roll the wheel into place. Through the use of leverage, the TRAC Tire Jack saves users time and their backs. Use the Jack and not your back!
Details:
• Heavy-duty welded steel construction offers extreme durability
• Steel base roller offers tire support and rolling convenience
Specifications:
Weight: 8 lbs
Dimensions: 18.5in (l) x 6.5in (w) x 3in (h)
Quick View
U.W.T. Wheel Weight Pliers & Hammer
Heavy-duty wheel weight pliers and hammer, the only tool on the market which will remove all wheel weights Fast & Easy without pinching fingers or scratching wheels.
- Heavy-duty design
- No pinching fingers or scratching wheels
- FAST & EASY
- Made in the USA
Quick View
Universal Bead Breaker Set
This heavy-duty self-retracting bead breaker works on all single, two and three-piece, 2-5-10 hole budd wheels, 7.50X16s, and all tubeless truck tires/rims, including new designs. The unit comes with 3 different claws which ensures a perfect installation. The Bead is broken using 5 Tons of force with a working range of up to 130 mm.
Works on most single, two, and three-piece tires/rims.
Gross weight = 21 lbs/9.5 kg
FREE SHIPPING
